Mclpanel Polycarbonate Sheets Polycarbonate Sheets na keɓaɓɓu
Cikakken bayani na samfurin polycarbonate Sheets
Bayanin Aikin
Ayyukan Mclpanel Polycarbonate Sheets sun haɗu da kayan aiki masu kyau, fasaha mai mahimmanci, kayan aiki mai mahimmanci, da ƙwararrun ƙwararru. Samfurin yana da takamaiman ƙayyadaddun bayanai da sigogin aiki. Shanghai mclpanel New Materials Co., Ltd. yana da hanyar sadarwar tallace-tallace da ta mamaye duk ƙasar.
Bayanin Aikin
Zane-Tsarin Filogi: Ƙirar-fulogi na waɗannan zanen gado ya ƙunshi ƙananan matosai ko protrusions a saman, wanda ke taimakawa wajen haɓaka daidaiton tsari da kwanciyar hankali na takardar.
Tsarin Ƙungiya Mai Girma Bakwai: Bango bakwai Jariyaya tsarin waɗannan zanen gado yana ba da ƙarin ƙarfi da ƙarfi idan aka kwatanta da daidaitattun zanen gadon polycarbonate mai bango da yawa. Wannan yana sa su zama masu juriya ga tasiri da lankwasawa.
Zaɓin Glazing mara sumul: Ana samar da wasu takaddun bangon bango 7 Plug-Pattern tare da tsarin thermoclick akan gefuna na gefe, yana ba da damar zaɓin kyalkyali mara kyau. Wannan yana sa tsarin shigarwa ya fi sauƙi kuma yana samar da ƙarewar gani.
ClickLoc 7 Walls Plug-Pattern Polycarbonate Sheet sun fito a matsayin mashahurin zaɓi don ginin waje da facade saboda aikinsu na musamman da ƙirar ƙira. Waɗannan fa'idodin suna ba da fa'idodi da yawa waɗanda ke sa su zama zaɓi mai ban sha'awa ga masu gine-gine, masu kwangila, da masu ginin.
sigogi na samfur
Ƙarfama | Ƙaswa | Nisa | Tsawa |
Polycarbonate Plug-Pattern panel | 30/40 mm | 500 mm | 5800 mm 11800 mm na musamman |
Albarkatun kasa | 100% budurwa Bayer/Sabic | ||
Yawan yawa | 1.2 g/cm³ | ||
Bayanan martaba | 7-Madaidaicin bango / Tsarin Lu'u-lu'u | ||
Launine | M, Opal, Green, Blue, Red, Bronze da Musamman | ||
Garanti | 10 Shekaru | ||
Mahimman Halaye da Amfanin Facade Facade na Polycarbonate
Samfura Abũbuwan amfãni
Aikace-aikacen samfur
● Facades: Tsarin toshe-tsari da ingantaccen ƙarfin bangon 7
Tsarin tsari na rectangle ya sa su dace da aikace-aikacen facade. Ana iya amfani da su don ƙirƙirar filaye masu ban sha'awa na gani da dorewa don gine-gine.
● Bangaren ciki: ClickLoc 7 Walls Plug-Pattern Polycarbonate Sheet za a iya amfani da shi azaman bangare don raba sararin ciki. Suna ba da keɓantawa yayin da suke barin haske ya wuce, ƙirƙirar yanayi mai haske da buɗewa.
● Rufe bangon waje: Ana iya amfani da waɗannan zanen gado azaman bangon waje don haɓaka ƙaya da dorewa na gine-gine. Tsarin toshe-tsarin yana ƙara sha'awar gani ga facade.
Fansaliya
● Ƙimar haɓakar faɗaɗa madaidaiciya: 0.065 MM/M℃
● Matsayin kashe wuta: GB8624, B1
● Babu haɓakar thermal
● 100% hujjar zubar ruwa
● Babban watsa haske
● Zai iya jure babban lodi
● Kariyar UV mai gefe biyu
● High thermal rufi yi
● Dace da lankwasawa zane
● Tsarin sarrafa haske mai hankali
● Sauƙaƙan shigarwa da sauri
STRUCTURE
Tsarin bango huɗu na rectangular, tsarin bango bakwai na bango, bango bakwai x tsarin, tsarin bango goma.
Zane-Tsarin Filogi: Ƙirar-fulogi na waɗannan zanen gado ya ƙunshi ƙananan matosai ko protrusions a saman, wanda ke taimakawa wajen haɓaka daidaiton tsari da kwanciyar hankali na takardar.
Shigar da samfur
Don rage kutsawar ƙurar ƙura a cikin ɗakunan dakunan, ƙarshen panel ɗin dole ne a rufe shi a hankali Ƙarshen babban panel da ƙananan ƙarshen dole ne a rufe shi sosai tare da Anti-Kura-Tape. Yana da mahimmanci cewa harshe da haɗin gwiwa na bangarori kuma an rufe su gaba ɗaya kuma a hankali.
1.Don rage girman ƙurar ƙurar ƙura a cikin ɗakunan sassan, dole ne a rufe ƙarshen panel ɗin a hankaliAbin da ke sama da ƙananan ƙarshen dole ne a rufe shi tare da Anti-Kura-Tepe. Yana da mahimmanci cewa harshe da haɗin gwiwa na bangarori kuma an rufe su gaba ɗaya kuma a hankali
2. Dole ne a cire fim ɗin kariya na bangarori a cikin wuraren da aka buga. Dole ne a tabbatar da cewa cire fim ɗin kariya daga kusan 6cm lokacin da aka saita bangarorin a cikin bayanin martaba.
3.Dole ne a sami haɗin gwiwa na fadada kusan. 3-5mm a tsakanin (wannan darajar tana aiki don yanayin shigarwa na +20 digiri)
4.A fastener dole ne a matsayi a kwance bar kuma dole ne a tura a kan panel. Dole ne a gyara abin ɗaure tare da aƙalla sukurori biyu a mashigar giciye.
5.Depending a kan panel tsawon, shi wajibi ne don amfani da guduma da softwood to interlock da bangarori.
6.Take kula cewa fastensarere matsayi daidai a cikin notches na bangarori.
7.The gasket dole ne a guga man kai tsaye tam uwa gaban panel don haka an sa a karkashin tashin hankali da kuma fix.Chemical juriya na polvcarbonate da sauran sinadaran amfani da za a duba da abokin ciniki a kan site.
Don me za mu zabe mu?
ABOUT MCLPANEL
Amfaninmu
FAQ
Abubuwan Kamfani
• Dangane da suna, muna neman haɗin gwiwar al'adu, fasaha da basira don samun fa'ida. Muna ba abokan cinikinmu inganci, tunani da sabis mai sauri.
• An kafa Mclpanel a cikin shekaru da suka gabata, mun tara kwarewar gudanarwa mai wadata.
•Muna da tawaga mai ilimi, inganci, matasa da kuzari wanda ke ba da tushe mai tushe don ci gabanmu.
Ana fitar da samfuran Mclpanel zuwa ƙasashe da yawa a Turai, Oceania, Afirka, da Amurka.
Don bayanin samfurin, da fatan za a shigar da bayanin lamba kuma bi asusun Mclpanel.