How to correctly install Polycarbonate U-lock roofing System？

Compared with ordinary sun panels, Polycarbonate U-lock roofing System mainly solves the complex and delicate installation process of ordinary sun panels. It does not need to use aluminum strips and glue to deal with water leakage, and the construction is simple and convenient. The installation principle of Polycarbonate U-lock roofing System is: the Polycarbonate U-lock roofing System is hooked by a stamped stainless steel anchor, and then the PC profile is clamped to form a lock structure. This joint treatment has good sealing performance, will not cause water leakage, and solves the problem of thermal expansion and contraction of sun panels.

Polycarbonate U-lock roofing System installation steps:

1. The board should be cut into the required length. When cutting the board length, it should be considered that the board overlaps the drainage gutter by 5-10 cm. It is recommended to cut the board with a portable saw when cutting.

2. Open the Polycarbonate U-lock roofing System to facilitate the insertion of the closing strip. The incision should be parallel to the top surface of the board, the incision depth is 20mm, and the saw blade should not damage the board surface when cutting. This step requires careful operation, so it is recommended to cut the mouth before assembly.

3. First tear off the PE protective film on the back of the board, then transport the board to the roof and prepare to install the first board.

4. Hook the Polycarbonate U-lock roofing System with a stainless steel anchor and screw it in, then put another piece of Polycarbonate U-lock roofing System into the stainless steel anchor.

5. Press the PC profile (bead) into the lock of the board, and you can use a rubber hammer to knock and install it.

6. Peel off the surface protective film of the board, and remove all the film paper immediately after the installation is completed. The time film paper will not be removed.

7. Install the closing profile on the eaves.

8. Install the waterproof plugs at both ends of the profile of the Polycarbonate U-lock roofing System

In conclusion, the prople installation of a Polycarbonate U-lock roofing system not only safeguards your property from the elements but also adds a touch of modern elegance. By adhering to the manufacturer's guidelines, using appropriate tools, and adopting meticulous planning, you ensure that your investment yields a durable, leak-proof, and aesthetically pleasing roof.