Hot Selling Polycarbonate Sheets for Greenhouse Best Supplier Best Brand
Product details of the polycarbonate sheets for greenhouse
Product Introduction
Mclpanel polycarbonate sheets for greenhouse is made of well-selected materials and manufactured by experienced staff using the advanced equipment as per set industry principles and guidelines, representing the finest workmanship in the industry. It is bestowed with the features like excellent quality and user-friendly performance. Shanghai mclpanel New Materials Co., Ltd. provides customers with one-stop products including polycarbonate sheets for greenhouse.
Polycarbonate facade system
Polycarbonate wall panel facade system find applications in various industries, such as architecture, construction, transportation, signage, and interior design. They are often used for partitions, skylights, lighting fixtures, protective barriers, decorative elements, and other applications where a combination of strength, transparency, and visual aesthetics is desired.
Product Description
Plug-Pattern Design: The plug-pattern design of these sheets consists of small plugs or protrusions on the surface, which helps to enhance the structural integrity and stability of the sheet.
Seven-Wall Rectangle Structure: The seven-wall Rectangle structure of these sheets provides increased strength and rigidity compared to standard multi-wall polycarbonate sheets. This makes them more resistant to impacts and bending .
Seamless Glazing Option: Some 7 Walls Plug-Pattern Sheets are produced with a thermoclick system on the side edges, allowing for a seamless glazing option. This makes the installation process easier and provides a visually appealing finish.
ClickLoc Plug-Pattern Polycarbonate Sheet have emerged as a popular choice for building exteriors and facades due to their exceptional performance and design versatility. These panels offer a range of benefits that make them an attractive option for architects, contractors, and building owners.
product parameters
|
Item |
Thickness |
Width |
Length |
|
Polycarbonate Plug-Pattern Panel |
30/40 mm |
500 mm |
5800 mm 11800 mm Customized |
|
Raw Material |
100% virgin Bayer/ Sabic |
||
|
Density |
1.2 g/cm³ |
||
|
Profiles |
7-Wall Rectangle/ Diamond Structure |
||
|
Colors |
Transparent, Opal, Green, Blue, Red, Bronze and Customized |
||
|
Warranty |
10 years |
||
Key Characteristics and Advantages of Polycarbonate Facade Panels
product Advantages
Color Lighting Effects
STRUCTURE
Four wall rectangular structure, seven wall rectangular structure, seven wall x structure, ten wall structure.
Plug-Pattern Design: The plug-pattern design of these sheets consists of small plugs or protrusions on the surface, which helps to enhance the structural integrity and stability of the sheet.
Product installation
For minimizing the infltration of dust particles into the chambers of the panels, the panel ends have to be sealed carefulyThe upper panel end and lower end must be tightly sealed with Anti-Dust-Tape. lt is important that tongue and groove jointof the panels are also sealed completely and carefully.
1.The protective film of the panels must be removed in areas of taping. lt must be ensured that remove the protective filmfrom all around about 6cm when the panels are set into the frame profile.
2.There must be an expansion joint of approx. 3-5mm in between(this value is valid for an installation temperature of +20 degree)
3.The fastener must be positioned at the horizontal bar and must be pushed against the panel. The fastener must be fixedwith at least two screws at the crossbar.
4.Depending on panel length,it is necessary to use hammer and softwood to interlock the panels.
5.Take care that the fastenersare positioned exactly inside the notches of the panels.
6.The gasket must be pressed directly tightly onto the front panel so it is put under tension and fixed.Chemical resistance of polvcarbonate against other chemicals used are to be checked by customer on site.
Why choose us?
ABOUT MCLPANEL
Our advantage
FAQ
Company Feature
• Our company has an excellent geographical location, with convenient transportation conditions. And they are the good foundation for our own development.
• Mclpanel has introduced an advanced management model and has built a strong and professional elite team. All this provides a strong guarantee for corporate development.
• Founded in Mclpanel has been developing for years and has become a leader in the industry.
• Our products are of good quality and excellent safety. They are highly praised by consumers and are even exported to all major regions.
Mclpanel's Polycarbonate Solid Sheets,Polycarbanote Hollow Sheets,U-Lock Polycarbonate,plug in polycarbonate sheet,Plastic Processing,Acrylic Plexiglass Sheet are safe and durable with the reasonable design. If you have any needs, please contact us. It is an honor for us to cooperate with you.