Focus on PC/PMMA sheet production and processing jason@mclsheet.com +86-187 0196 0126
Product details of the panel polycarbonate
Product Overview
Mclpanel panel polycarbonate is carefully crafted using the latest techniques in compliance with industry standards. Compared with other products, this product has the advantages of long service life, stable performance and good usability. Mclpanel's panel polycarbonate can be used in multiple industries. Shanghai mclpanel New Materials Co., Ltd. has a strong R&D team, top class management force together with a qualified control system.
Product Introduction
Our panel polycarbonate has the following advantages over similar products.
Polycarbonate facade system
Polycarbonate wall panel facade system find applications in various industries, such as architecture, construction, transportation, signage, and interior design. They are often used for partitions, skylights, lighting fixtures, protective barriers, decorative elements, and other applications where a combination of strength, transparency, and visual aesthetics is desired.
Product Description
Plug-Pattern Design: The plug-pattern design of these sheets consists of small plugs or protrusions on the surface, which helps to enhance the structural integrity and stability of the sheet.
Seven-Wall Rectangle Structure: The seven-wall Rectangle structure of these sheets provides increased strength and rigidity compared to standard multi-wall polycarbonate sheets. This makes them more resistant to impacts and bending .
Seamless Glazing Option: Some 7 Walls Plug-Pattern Sheets are produced with a thermoclick system on the side edges, allowing for a seamless glazing option. This makes the installation process easier and provides a visually appealing finish.
ClickLoc Plug-Pattern Polycarbonate Sheet have emerged as a popular choice for building exteriors and facades due to their exceptional performance and design versatility. These panels offer a range of benefits that make them an attractive option for architects, contractors, and building owners.
product parameters
Item |
Thickness |
Width |
Length |
Polycarbonate Plug-Pattern Panel |
30/40 mm |
500 mm |
5800 mm 11800 mm Customized |
Raw Material |
100% virgin Bayer/ Sabic |
||
Density |
1.2 g/cm³ |
||
Profiles |
7-Wall Rectangle/ Diamond Structure |
||
Colors |
Transparent, Opal, Green, Blue, Red, Bronze and Customized |
||
Warranty |
10 years |
Key Characteristics and Advantages of Polycarbonate Facade Panels
product Advantages
Color Lighting Effects
STRUCTURE
Four wall rectangular structure, seven wall rectangular structure, seven wall x structure, ten wall structure.
Plug-Pattern Design: The plug-pattern design of these sheets consists of small plugs or protrusions on the surface, which helps to enhance the structural integrity and stability of the sheet.
Product installation
For minimizing the infltration of dust particles into the chambers of the panels, the panel ends have to be sealed carefulyThe upper panel end and lower end must be tightly sealed with Anti-Dust-Tape. lt is important that tongue and groove jointof the panels are also sealed completely and carefully.
1.The protective film of the panels must be removed in areas of taping. lt must be ensured that remove the protective filmfrom all around about 6cm when the panels are set into the frame profile.
2.There must be an expansion joint of approx. 3-5mm in between(this value is valid for an installation temperature of +20 degree)
3.The fastener must be positioned at the horizontal bar and must be pushed against the panel. The fastener must be fixedwith at least two screws at the crossbar.
4.Depending on panel length,it is necessary to use hammer and softwood to interlock the panels.
5.Take care that the fastenersare positioned exactly inside the notches of the panels.
6.The gasket must be pressed directly tightly onto the front panel so it is put under tension and fixed.Chemical resistance of polvcarbonate against other chemicals used are to be checked by customer on site.
Why choose us?
ABOUT MCLPANEL
Our advantage
FAQ
Company Introduction
Shanghai mclpanel New Materials Co., Ltd. is a comprehensive company in shang hai. Polycarbonate Solid Sheets,Polycarbanote Hollow Sheets,U-Lock Polycarbonate,plug in polycarbonate sheet,Plastic Processing,Acrylic Plexiglass Sheet are key products. To improve the service quality, we have set up an excellent service team and a one-for-one service pattern between enterprises and customers. Each customer is equipped with a service specialist. If you are interested, please contact customer service staff for consultation!