Mclpanel Polycarbonate Roof Sheeting Prices High Qualtiy
Product details of the polycarbonate roof sheeting prices
Product Information
Mclpanel polycarbonate roof sheeting prices is designed to be environmentally friendly and cost efficient. The product is quality-assured as we always keep 'quality first' firmly in mind. The product is of great value and now extensively used in the market.
Product Description
Plug-Pattern Design: The plug-pattern design of these sheets consists of small plugs or protrusions on the surface, which helps to enhance the structural integrity and stability of the sheet.
Seven-Wall Rectangle Structure: The seven-wall Rectangle structure of these sheets provides increased strength and rigidity compared to standard multi-wall polycarbonate sheets. This makes them more resistant to impacts and bending .
Seamless Glazing Option: Some 7 Walls Plug-Pattern Sheets are produced with a thermoclick system on the side edges, allowing for a seamless glazing option. This makes the installation process easier and provides a visually appealing finish.
ClickLoc 7 Walls Plug-Pattern Polycarbonate Sheet have emerged as a popular choice for building exteriors and facades due to their exceptional performance and design versatility. These panels offer a range of benefits that make them an attractive option for architects, contractors, and building owners.
product parameters
|
Item |
Thickness |
Width |
Length |
|
Polycarbonate Plug-Pattern Panel |
30/40 mm |
500 mm |
5800 mm 11800 mm Customized |
|
Raw Material |
100% virgin Bayer/ Sabic |
||
|
Density |
1.2 g/cm³ |
||
|
Profiles |
7-Wall Rectangle/ Diamond Structure |
||
|
Colors |
Transparent, Opal, Green, Blue, Red, Bronze and Customized |
||
|
Warranty |
10 years |
||
Key Characteristics and Advantages of Polycarbonate Facade Panels
product Advantages
Product application
● Facades: The plug-pattern design and enhanced strength of 7 wall
Rectangle structure Sheets make them suitable for facade applications. They can be used to create visually appealing and durable exterior surfaces for buildings.
● Internal Partitions: ClickLoc 7 Walls Plug-Pattern Polycarbonate Sheet can be used as partitions to divide interior spaces. They provide privacy while still allowing light to pass through, creating a bright and open atmosphere.
● External Wall Cladding: These sheets can be used as external wall cladding to enhance the aesthetics and durability of buildings. The plug-pattern design adds visual interest to the facade.
Features
● Coefficient of linear expansion: 0.065 MM/M℃
● Fire retardant level: GB8624, B1
● No thermal expansion
● 100% water leakage proof
● High light transmittance
● Can withstand extremely high loads
● Double-sided UV protection
● High thermal insulation performance
● Suitable for bending design
● Intelligent light control system
● Simple and fast installation
STRUCTURE
Four wall rectangular structure, seven wall rectangular structure, seven wall x structure, ten wall structure.
Plug-Pattern Design: The plug-pattern design of these sheets consists of small plugs or protrusions on the surface, which helps to enhance the structural integrity and stability of the sheet.
Product installation
For minimizing the infltration of dust particles into the chambers of the panels, the panel ends have to be sealed carefulyThe upper panel end and lower end must be tightly sealed with Anti-Dust-Tape. lt is important that tongue and groove jointof the panels are also sealed completely and carefully.
1.For minimizing the infltration of dust particles into the chambers of the panels, the panel ends have to be sealed carefulyThe upper panel end and lower end must be tightly sealed with Anti-Dust-Tape. lt is important that tongue and groove jointof the panels are also sealed completely and carefully
2.The protective film of the panels must be removed in areas of taping. lt must be ensured that remove the protective filmfrom all around about 6cm when the panels are set into the frame profile.
3.There must be an expansion joint of approx. 3-5mm in between(this value is valid for an installation temperature of +20 degree)
4.The fastener must be positioned at the horizontal bar and must be pushed against the panel. The fastener must be fixedwith at least two screws at the crossbar.
5.Depending on panel length,it is necessary to use hammer and softwood to interlock the panels.
6.Take care that the fastenersare positioned exactly inside the notches of the panels.
7.The gasket must be pressed directly tightly onto the front panel so it is put under tension and fixed.Chemical resistance of polvcarbonate against other chemicals used are to be checked by customer on site.
Why choose us?
ABOUT MCLPANEL
Our advantage
FAQ
Company Feature
• We have built a professional product operation team to provide a solid backing for our products to open the domestic and international markets.
• Mclpanel is located at the intersection of different highways. The great geographic location, traffic convenience, and easy distribution make it an ideal place for the sustainable development of the enterprise.
• Based on network operation, Mclpanel has opened up a wider domestic and international market, greatly increased the market share and broadened the sales scope.
Mclpanel's Polycarbonate Solid Sheets,Polycarbanote Hollow Sheets,U-Lock Polycarbonate,plug in polycarbonate sheet,Plastic Processing,Acrylic Plexiglass Sheet are available in diverse types, favorable price and they are comfortable and durable. If you have needs to order in bulk, please leave your contact information. We will open channels for you.