Solid Polycarbonate Sheet for Sale Upply
Company Advantages
· The advanced production methods, along with the constant investment in research and development, ensures Mclpanel solid polycarbonate sheet is finely and efficiently manufactured.
· After thousands of testings, the product is ensured to have a first-class quality.
· Shanghai mclpanel New Materials Co., Ltd. has made in-depth adjustments to the organizational structure, brand, and production layout.
Product Description
Plug-Pattern Design: The plug-pattern design of these sheets consists of small plugs or protrusions on the surface, which helps to enhance the structural integrity and stability of the sheet.
Four-Wall Rectangle Structure: The four-wall Rectangle structure of these sheets provides increased strength and rigidity compared to standard multi-wall polycarbonate sheets. This makes them more resistant to impacts and bending .
Seamless Glazing Option: Some 4 Walls Plug-Pattern Sheets are produced with a thermoclick system on the side edges, allowing for a seamless glazing option. This makes the installation process easier and provides a visually appealing finish.
Four wall polycarbonate partition panel have emerged as a popular choice for building exteriors and facades due to their exceptional performance and design versatility. These panels offer a range of benefits that make them an attractive option for architects, contractors, and building owners.
product parameters
|
Item |
Thickness |
Width |
Length |
|
Polycarbonate Plug-Pattern Panel |
20/30/40 mm |
500 mm |
5800 mm 11800 mm Customized |
|
Raw Material |
100% virgin Bayer/ Sabic |
||
|
Density |
1.2 g/cm³ |
||
|
Profiles |
4-Wall Rectangle/7-Wall Rectangle/ Diamond Structure |
||
|
Colors |
Transparent, Opal, Green, Blue, Red, Bronze and Customized |
||
|
Warranty |
10 years |
||
Key Characteristics and Advantages of Polycarbonate Facade Panels
product Advantages
Product application
● Facades: The plug-pattern design and enhanced strength of 4 wall
Rectangle polycarbonate partition panel make them suitable for facade applications. They can be used to create visually appealing and durable exterior surfaces for buildings.
● Internal Partitions: Four wall polycarbonate partition panel can be used as partitions to divide interior spaces. They provide privacy while still allowing light to pass through, creating a bright and open atmosphere.
● External Wall Cladding: These sheets can be used as external wall cladding to enhance the aesthetics and durability of buildings. The plug-pattern design adds visual interest to the facade.
Features
● Coefficient of linear expansion: 0.065 MM/M℃
● Fire retardant level: GB8624, B1
● No thermal expansion
● 100% water leakage proof
● High light transmittance
● Can withstand extremely high loads
● Double-sided UV protection
● High thermal insulation performance
● Suitable for bending design
● Intelligent light control system
● Simple and fast installation
STRUCTURE
Four wall rectangular structure, seven wall rectangular structure, seven wall x structure, ten wall structure.
Plug-Pattern Design: The plug-pattern design of these sheets consists of small plugs or protrusions on the surface, which helps to enhance the structural integrity and stability of the sheet.
PLUG-PATTERN PC SHEET INSTALLATION
For minimizing the infltration of dust particles into the chambers of the panels, the panel ends have to be sealed carefulyThe upper panel end and lower end must be tightly sealed with Anti-Dust-Tape. lt is important that tongue and groove jointof the panels are also sealed completely and carefully.
1.For minimizing the infltration of dust particles into the chambers of the panels, the panel ends have to be sealed carefulyThe upper panel end and lower end must be tightly sealed with Anti-Dust-Tape. lt is important that tongue and groove jointof the panels are also sealed completely and carefully
2.The protective film of the panels must be removed in areas of taping. lt must be ensured that remove the protective filmfrom all around about 6cm when the panels are set into the frame profile.
3.There must be an expansion joint of approx. 3-5mm in between(this value is valid for an installation temperature of +20 degree)
4.The fastener must be positioned at the horizontal bar and must be pushed against the panel. The fastener must be fixedwith at least two screws at the crossbar.
5.Depending on panel length,it is necessary to use hammer and softwood to interlock the panels.
6.Take care that the fastenersare positioned exactly inside the notches of the panels.
7.The gasket must be pressed directly tightly onto the front panel so it is put under tension and fixed.Chemical resistance of polvcarbonate against other chemicals used are to be checked by customer on site.
8.PC material isespecially avoided to use.After finish installation, remove the panel's protective foil.
Why choose us?
ABOUT MCLPANEL
Our advantage
FAQ
Company Features
· Since the foundation, Shanghai mclpanel New Materials Co., Ltd. has been focusing on providing customers from all over the world with the best-quality solid polycarbonate sheet.
· Mclpanel has complete quality control system to produce solid polycarbonate sheet.
· Excellence in service is our primary object. And our mission to exceed customer exceptions by providing high value, quality, and competitive products and services has never changed.
Product Details
With the pursuit of perfection, Mclpanel exerts ourselves for well-organized production and high-quality solid polycarbonate sheet.
Application of the Product
Our solid polycarbonate sheet is widely used in multiple industries and fields.
Mclpanel is dedicated to solving your problems and providing you with one-stop and comprehensive solutions.
Product Comparison
Compared with similar products, the solid polycarbonate sheet of Mclpanel is more strict in the selection of raw materials. The specific aspects are as follows.