Polycarbonate wall panel facade system 30mm 40mm with multicolor lighting
Polycarbonate wall panel facade system find applications in various industries, such as architecture, construction, transportation, signage, and interior design. They are often used for partitions, skylights, lighting fixtures, protective barriers, decorative elements, and other applications where a combination of strength, transparency, and visual aesthetics is desired.
Product name: Polycarbonate wall panel facade system
Width: 500mm and 800mm
Thickness: 30mm 40mm or 50mm
Color: Clear, Opal, Blue, Lake Blue, Green, Bronze, or Customized
Length: Customized
Structure: Four wall rectangular, 7 wall X structure, 7 wall rectangular.
Polycarbonate facade system
Polycarbonate wall panel facade system find applications in various industries, such as architecture, construction, transportation, signage, and interior design. They are often used for partitions, skylights, lighting fixtures, protective barriers, decorative elements, and other applications where a combination of strength, transparency, and visual aesthetics is desired.
Product Description
Plug-Pattern Design: The plug-pattern design of these sheets consists of small plugs or protrusions on the surface, which helps to enhance the structural integrity and stability of the sheet.
Seven-Wall Rectangle Structure: The seven-wall Rectangle structure of these sheets provides increased strength and rigidity compared to standard multi-wall polycarbonate sheets. This makes them more resistant to impacts and bending .
Seamless Glazing Option: Some 7 Walls Plug-Pattern Sheets are produced with a thermoclick system on the side edges, allowing for a seamless glazing option. This makes the installation process easier and provides a visually appealing finish.
ClickLoc 7 Walls Plug-Pattern Polycarbonate Sheet have emerged as a popular choice for building exteriors and facades due to their exceptional performance and design versatility. These panels offer a range of benefits that make them an attractive option for architects, contractors, and building owners.
product parameters
|
Item |
Thickness |
Width |
Length |
|
Polycarbonate Plug-Pattern Panel |
30/40 mm |
500 mm |
5800 mm |
|
Raw Material |
100% virgin Bayer/ Sabic |
||
|
Density |
1.2 g/cm³ |
||
|
Profiles |
7-Wall Rectangle/ Diamond Structure |
||
|
Colors |
Transparent, Opal, Green, Blue, Red, Bronze and Customized |
||
|
Warranty |
10 years |
||
Key Characteristics and Advantages of Polycarbonate Facade Panels
product Advantages
Color Lighting Effects
STRUCTURE
Four wall rectangular structure, seven wall rectangular structure, seven wall x structure, ten wall structure.
Plug-Pattern Design: The plug-pattern design of these sheets consists of small plugs or protrusions on the surface, which helps to enhance the structural integrity and stability of the sheet.
Product installation
For minimizing the infltration of dust particles into the chambers of the panels, the panel ends have to be sealed carefulyThe upper panel end and lower end must be tightly sealed with Anti-Dust-Tape. lt is important that tongue and groove jointof the panels are also sealed completely and carefully.
1.The protective film of the panels must be removed in areas of taping. lt must be ensured that remove the protective filmfrom all around about 6cm when the panels are set into the frame profile.
2.There must be an expansion joint of approx. 3-5mm in between(this value is valid for an installation temperature of +20 degree)
3.The fastener must be positioned at the horizontal bar and must be pushed against the panel. The fastener must be fixedwith at least two screws at the crossbar.
4.Depending on panel length,it is necessary to use hammer and softwood to interlock the panels.
5.Take care that the fastenersare positioned exactly inside the notches of the panels.
6.The gasket must be pressed directly tightly onto the front panel so it is put under tension and fixed.Chemical resistance of polvcarbonate against other chemicals used are to be checked by customer on site.
Why choose us?
ABOUT MCLPANEL
Our advantage
FAQ
In modern life, PC Chair Mats are widely used in various scenarios such as office, home, and public seats due to their unique performance. The material characteristics of PC sheet, also known as polycarbonate sheet, have a crucial impact on the user experience of seat cushions. These characteristics shape people's user experience from multiple dimensions such as comfort, durability, and safety.
In the era of pursuing uniqueness and individuality, product packaging is no longer limited to the basic functions of protecting and containing products. Acrylic gift boxes, with their excellent plasticity, have become an ideal choice to meet diversified needs. From exterior design to internal structure, from material characteristics to process applications, acrylic gift boxes showcase infinite possibilities on the path of personalized customization.
In law enforcement actions to maintain social order and handle emergencies, Anti Riot Shield have become an indispensable first choice equipment for law enforcement personnel. This type of protective equipment, mainly made of polycarbonate, occupies an important position in modern law enforcement work due to its excellent performance, wide applicability, and comprehensive protection for law enforcement personnel.